客服手機:13061644116
電話咨詢:021-64149583
郵件咨詢:moli@microphotons.com
DSP鎖相放大器
信號通道:
電壓輸入 |
Single-ended or differential |
分辨率 |
2 nV to 1 V |
電流輸入 |
106 or 108 V/A |
輸入阻抗電壓 |
10 MΩ + 25 pF, AC or DC coupled |
輸入阻抗電流 |
1 kΩ to virtual ground |
增益精度 |
±1 % (±0.2 % typ.) |
噪聲 (typ.) |
6 nV/√Hz at 1 kHz; 0.13 pA/√Hz at 1 kHz (106 V/A); 0.013 pA/√Hz at 100 Hz (108 V/A) |
線性濾波 |
50/60 Hz and 100/120 Hz (Q = 4 ) |
CMRR |
100 dB to 10 kHz, decreasing by 6 dB/oct above 10 kHz |
動態范圍 |
>100 dB (without prefilters) |
穩定性 |
<5 ppm/°C |
信參考通道:
頻率范圍 |
0.001 Hz to 102.4 kHz |
參考輸入 |
TTL or sine (400 mVpp min.) |
輸入阻抗 |
1 MΩ, 25 pF |
相位分辨率 |
0.01° front panel, 0.008° through computer interface |
絕對相位誤差 |
<1° |
相對相位誤差 |
<0.001° |
正交性 |
90° ± 0.001° |
相位噪聲 |
Internal ref. Synthesized, <0.0001° rms at 1 kHzExternal ref. 0.005° rms at 1 kHz (100 ms time constant, 12 dB/oct) |
相位漂移 |
<0.01°/°C below 10 kHz, <0.1°/°C above 10 kHz |
諧波檢測 |
2F, 3F, ... nF to 102 kHz (n < 19,999) |
收集時間 |
(2 cycles + 5 ms) or 40 ms,whichever is larger |
解調器:
穩定性 |
Digital outputs and display: no drift Analog outputs: <5 ppm/°C for all dynamic reserve settings |
諧波抑制器 |
-90 dB |
時間常數 |
10 μs to 30 ks (6, 12, 18, 24 dB/oct rolloff). Synchronous filters available below 200 Hz. |
內部振蕩器:
范圍 |
1 mHz to 102 kHz |
頻率精度 |
25 ppm + 30 μHz |
頻率分辨率 |
4 1/2 digits or 0.1 mHz, whichever is greater |
失真 |
-80 dBc (f <10 kHz), -70 dBc(f >10 kHz) @ 1 Vrms amplitude |
振幅 |
0.004 to 5 Vrms into 10 kΩ (2 mV resolution), 50 Ω output impedance, 50 mA maximum current into 50 Ω Amplitude accuracy 1 % Amplitude stability 50 ppm/°C Outputs Sine, TTL (When using an external reference, both outputs are phase locked to the external reference.) |
顯示:
通道1 |
4 1/2 -digit LED display with 40-segment LED bar graph. X, R, X-noise, Aux 1 or Aux 2. The display can also be any of these quantities divided by Aux 1 or Aux 2. |
通道2 |
(SR830) 4 1/2 -digit LED display with 40-segment LED bar graph. Y, θ, Y-noise, Aux 3 or Aux 4. The display can also be any of these quantities divided by Aux 3 or Aux 4. |
補償 |
X, Y, R can be offset up to ±105 % of full scale. |
放大倍率 |
X, Y, R can be expanded by 10× or 100×. |
參考 |
4 1/2 -digit LED display |
輸入和輸出:
CH1輸出 |
X, R, X-noise, Aux 1 or Aux 2,(±10 V), updated at 512 Hz |
CH2輸出 |
(SR830) Y, θ, Y-noise, Aux 3 or Aux 4,(±10 V), updated at 512 Hz |
X, Y輸出 |
In-phase and quadrature components (rear panel) (±10 V), updated at 256 kHz. |
Aux. A/D inputs |
4 BNC inputs, 16-bit, ±10 V,1 mV resolution, sampled at 512 Hz |
Aux. D/A outputs |
4 BNC outputs, 16-bit, ±10 V, 1 mV resolution |
正弦 |
Internal oscillator analog output |
TTL輸出 |
Internal oscillator TTL output |
數據緩沖器 |
The SR810 has an 8k point buffer. The SR830 has two 16k point buffers. Data is recorded at rates to 512 Hz and read through the computer interfaces. |
觸發輸入 (TTL) |
Trigger synchronizes data recording |
遠程放大器 |
Provides power to the optional SR550, R552 and SR554 preamps |
連接口 |
IEEE-488.2 and RS-232 interfaces standard. All instrument functions can be controlled and read through IEEE-488.2 or RS-232 interfaces. |